Assistive Hardware Products - Mounts & Rests

 

For holding devices at various positions. Adjust the Arm. Lock the angle. Press the Activation Button Hit it...Bump it...Push it..!Arm and Sensitrac Pad will not move. The adjustable arm was designed to improve access to devices by having a wider range of access angles. Holds any size Switches, Buttons, Pads.

If uncontrolled movement is an issue with the user, the suction power of the patented Sensitrac Pad Base securely holds the adjustable arm to the smooth flat surface of any wood, plastic, glass or metal desk or table top. The front panel of the adjustable arm is a removable slider that is covered with the new Ultra Mate Velcro to hold the devices you wish to use.In some cases you may want to have additional sliders for convenient and faster on/off changes of devices.

Size of devices for the Arm
The size of the devices to use on the adjustable arm is limited to 6x6 for stability and safety reasons .
For devices larger than 6"x 6" that require different access angles, see Adjustable Slant Board with Slider System.

Need to move it for the better access for user Just lift the edge of the pad in the cut-out area of the cover and reposition it and then press the centre button to activate it.

Keep it Clean!
The Sensitrac Pad and the desk/table top surface should be kept clean for best suction power. Use plain water and paper towel or window cleaner wipes (the best).

For holding devices at various vertical angles. Adjust the Flipper. Lock it in Place. Bump it. Push it.! Flipper and Sensitrac Pad will not move.The adjustable Flipper was designed to improve access to devices for users with light touch who require upright access angles at various degrees. The suction power of the new patented Sensitrac Pad Base securely holds The Flipper to the smooth flat surface of any wood, plastic, glass or metal desk/table top.

If strong uncontrolled movement is an issue with the user, then it's recommended to consider the Adjustable Arm.

Size of devices for the Flipper
The size of the devices to use on the adjustable arm is limited to 6" x 6" for stability and safety reasons.For devices larger than 6"x 6" that require different access angles, click on Adjustable Slant Board with Slider System.

The front panel of the adjustable Flipper is a removable slider that is covered with the new Ultra Mate Velcro to securely hold the devices you wish to use.

Slider panel locks onto Flipper
To prevent slide panel from coming off during use or if the user hits it upwards, the slider is secured with a finger operated secure FLIP LOCK on the top edge.

Keep it Clean !
The Sensitrac Pad and the desk/table top surface should be kept clean for best suction power. Use plain water and paper towel or window cleaner wipes (the best).

Adjust to angle of best access, then lock it in place.Adjustable front panel is made with the new approved Sterk-Lan plastic material. Strong, Unbreakable, Clear, Lightweight.HIT it. Smash it.Hammer it. It won't break !

If the movement of the stand on the desk/table top is an issue with the user, the Sensitrac Padwill hold it to the desk top.

Now you can slide devices ON/OFF in seconds
- On / Off slider system
- Sticks to the desk/table top and won't move
- Adjustable to 5 angles

HIT it. PUSH it. BUMP it! It won't move if used with new Sensitrac Pad Pad Available Separately.

Note: If uncontrolled movement is an issue with the user, Sensitrac Pad will hold the Slant Board securely in place by attaching it to the bottom of the unit. The Sensitrac pad maybe ordered when ordering the Slant Board.

For Switches, Buttons, Touch Pads, small devices, etc.

What Fits on the Sensitrac Pad? Switches, Buttons, Touch Pads and other devices that are 6"x 6" or less are best on the Sensitrac Pad only.

Hit It .Push It .Bump It. Pad will not move! Top surface of the Sensitrac Pad is the New strong Ultra Mate Velcro. The pad securely sticks to a flat table-desktop or any flat area and will not move!

TOP